Trump Told Us To

I challenge you to cut through anything with that kit. It’s missing some key components.

Abd you’ve clearly never cut steel with an angle grinder before.
Sure, you need bottles, and I would probably start with a scarifying tip. I don't care if you don't think I've done much grinding. I've got enough old work shirts with lots of pinholes burned in the belly that shows I have.
 
I cut steel on piledriving jobs all over northern CA. I had a machine shop and cut steel daily for the business. Take torches to the border and see what happens.
Then you know that 1/4 inch steel isn't a problem. I've never seen sheet pile that thin
 
Then you know that 1/4 inch steel isn't a problem. I've never seen sheet pile that thin
It is not the steel, it is the tanks carrying Oxygen and Acetylene that is the problem for the illegal aliens. I never measured sheet pile for thickness, but my guess is about 3/8 inch thick.
 
It is not the steel, it is the tanks carrying Oxygen and Acetylene that is the problem for the illegal aliens. I never measured sheet pile for thickness, but my guess is about 3/8 inch thick.
You never saw small bottles in a carrier that can easily be carried with one hand? Not enough gas? get 2 sets of bottles.
 
You never saw small bottles in a carrier that can easily be carried with one hand? Not enough gas? get 2 sets of bottles.
1756171900692.webp
 
15th post
Damn. I've got an old set that I would let go for $75. They only cost me about 25 or 30 a few years back.
If you climb the border wall, a good market waits you there. Take empties though.
 
Filled with concrete and rebar.
I'll talk you through it. start with a scarfing tip so the slag will blow outside of what you are cutting. Cut all the way around the steel twice. Cut from top cut to bottom cut on each side and remove plates. Bust concrete with a sledge hammer. Cut exposed rebar with torch. 30 minutes and you have removed enough fence to walk through.
 
Back
Top Bottom