Illegals "Cutting Thru Trump's Wall" Another HOAX

[WillPower]

The breaches have been made using a popular cordless household tool known as a reciprocating saw that retails at hardware stores for as little as $100. When fitted with specialized blades, the saws can slice through one of the barrier’s steel-and-concrete bollards in a matter of minutes, according to the agents

Ah, so now it's a reciprocating saw....LMAO!!! So show me a pic of this breach.....I'll wait.

 

[jc456]

More precisely, they TUNNEL into the US, some tunnels have rails....


drugs mexico tunnel - Google Search

Fine...the subject of this OP is cutting through it with a cordless disc cutter....impossible.

No, it is not at all impossible, but very easy.
Anyone claiming a diamond blade dulls quickly on concrete is just lying.
I have had the same masonry blade for over a decade, and it has easily cut through 4" thick concrete, totally over hundreds of linear feet by now. All you have to do is keep it cool by spraying it with a little water.

But that is NOT how you cut through these steel columns that are only filled with concrete.
With those columns, all you have to do is cut the surface steel with a sawsall blade. Then you whack the section with a sledge hammer, the remaining steel bend and peels, while the concrete shatters and turns to gravel.

A disc cutter will also cut through the steel, as long as you have the right blade.
This would do nicely for the steel.

I would need at least 1 extra battery though.

hahahahahahahaahahahaha

 

[Lesh]

Dude...you don't even know what a demo saw it?

I have one in my garage. Diamond blade. Gas powered. Weighs about 20 pounds. Not cheap but coyotes and drug dealers can afford the grand pretty easy.

It'd cut through concrete with rebar 8 inches thick in about 5 minutes

Wow..they've come down in price

$500.00

 

[LaDairis]

edtheycynic = define FASCIST for us....


Start the Jeopardy! music....

 

[WillPower]

Translation = YEAH YEAH YEAH, GO AHEAD ISRAEL AND MURDER OUR NAVY PERSONNEL!!!!!!!!!!!!

So do a DNA analysis....I bet you got more JEW blood than you know....Hitler hated the secret Jews worse than the open ones.....does your secret society know you might be one of.....them?

 

[Likkmee]

No, it is not at all impossible, but very easy.
Anyone claiming a diamond blade dulls quickly on concrete is just lying.
I have had the same masonry blade for over a decade, and it has easily cut through 4" thick concrete, totally over hundreds of linear feet by now. All you have to do is keep it cool by spraying it with a little water.

But that is NOT how you cut through these steel columns that are only filled with concrete.
With those columns, all you have to do is cut the surface steel with a sawsall blade. Then you whack the section with a sledge hammer, the remaining steel bend and peels, while the concrete shatters and turns to gravel.

A disc cutter will also cut through the steel, as long as you have the right blade.
This would do nicely for the steel.

I would need at least 1 extra battery though.

HORSESHIT...NO masonry blade will cut through rebar encased in concrete and no cordless tool has the capacity to even try it....FAIL.

A gas concrete saw will cut it like nobodys business. It would be my first choice

 

[LaDairis]

.I bet you got more JEW blood than you know.

Less than Einstein, but that doesn't change my extreme admiration for Albert....

As for trotting out Hitler, remember what patriotic American Einstein said about FASCISM in ISRAEL before you celebrate the attack on the USS Liberty again.


Einstein Letter Warning Of
Zionist Fascism In Israel
Letter That Albert Einstein Sent to the New York Times
1948, Protesting the Visit of Menachem Begin
11-1-4

Letters to the Editor
New York Times
December 4, 1948
TO THE EDITORS OF THE NEW YORK TIMES:
Among the most disturbing political phenomena of our times is the emergence in the newly created state of Israel of the "Freedom Party" (Tnuat Haherut), a political party closely akin in its organization, methods, political philosophy and social appeal to the Nazi and Fascist parties. It was formed out of the membership and following of the former Irgun Zvai Leumi, a terrorist, right-wing, chauvinist organization in Palestine.

The current visit of Menachem Begin, leader of this party, to the United States is obviously calculated to give the impression of American support for his party in the coming Israeli elections, and to cement political ties with conservative Zionist elements in the United States. Several Americans of national repute have lent their names to welcome his visit. It is inconceivable that those who oppose fascism throughoutthe world, if correctly informed as to Mr. Begin's political record and perspectives, could add their names and support to the movement he represents.
Before irreparable damage is done by way of financial contributions, public manifestations in Begin's behalf, and the creation in Palestine of the impression that a large segment of America supports Fascist elements in Israel, the American public must be informed as to the record and objectives of Mr. Begin and his movement. The public avowals of Begin's party are no guide whatever to its actual character. Today they speak of freedom, democracy and anti-imperialism, whereas until recently they openly preached the doctrine of the Fascist state. It is in its actions that the terrorist party betrays its real character; from its past actions we can judge what it may be expected to do in the future.
Attack on Arab Village
A shocking example was their behavior in the Arab village of Deir Yassin. This village, off the main roads and surrounded by Jewish lands, had taken no part in the war, and had even fought off Arab bands who wanted to use the village as their base. On April 9 (THE NEW YORK TIMES), terrorist bands attacked this peaceful village, which was not a military objective in the fighting, killed most of its inhabitants ? 240men, women, and children - and kept a few of them alive to parade as captives through the streets of Jerusalem. Most of the Jewish community was horrified at the deed, and the Jewish Agency sent a telegram of apology to King Abdullah of Trans-Jordan. But the terrorists, far from being ashamed of their act, were proud of this massacre, publicized it widely, and invited all the foreign correspondents present in the country to view the heaped corpses and the general havoc at Deir Yassin. The Deir Yassin incident exemplifies the character and actions of the Freedom Party.
Within the Jewish community they have preached an admixture of ultranationalism, religious mysticism, and racial superiority. Like other Fascist parties they have been used to break strikes, and have themselves pressed for the destruction of free trade unions. In their stead they have proposed corporate unions on the Italian Fascist model. During the last years of sporadic anti-British violence, the IZL and Stern groups inaugurated a reign of terror in the Palestine Jewish community. Teachers were beaten up for speaking against them, adults were shot for not letting their children join them. By gangster methods, beatings, window-smashing, and wide-spread robberies, the terrorists intimidated the population and exacted a heavy tribute.
The people of the Freedom Party have had no part in the constructive achievements in Palestine. They have reclaimed no land, built no settlements, and only detracted from the Jewish defense activity. Their much-publicized immigration endeavors were minute, and devoted mainly to bringing in Fascist compatriots.
Discrepancies Seen
The discrepancies between the bold claims now being made by Begin and his party, and their record of past performance in Palestine bear the imprint of no ordinary political party. This is the unmistakable stamp of a Fascist party for whom terrorism (against Jews, Arabs, and British alike), and misrepresentation are means, and a "Leader State" is the goal.
In the light of the foregoing considerations, it is imperative that the truth about Mr. Begin and his movement be made known in this country. It is all the more tragic that the top leadership of American Zionism has refused to campaign against Begin's efforts, or even to expose to its own constituents the dangers to Israel from support to Begin.
The undersigned therefore take this means of publicly presenting a few salient facts concerning Begin and his party; and of urging all concerned not to support this latest manifestation of fascism.
ISIDORE ABRAMOWITZ
HANNAH ARENDT
ABRAHAM BRICK
RABBI JESSURUN CARDOZO
ALBERT EINSTEIN
HERMAN EISEN, M.D.
HAYIM FINEMAN
M. GALLEN, M.D.
H.H. HARRIS
ZELIG S. HARRIS
SIDNEY HOOK
FRED KARUSH
BRURIA KAUFMAN
IRMA L. LINDHEIM
NACHMAN MAISEL
SEYMOUR MELMAN
MYER D. MENDELSON
M.D., HARRY M. OSLINSKY
SAMUEL PITLICK
FRITZ ROHRLICH
LOUIS P. ROCKER
RUTH SAGIS
ITZHAK SANKOWSKY
I.J. SHOENBERG
SAMUEL SHUMAN
M. SINGER
IRMA WOLFE
STEFAN WOLF.
New York, Dec. 2, 1948

 

[edthecynic]

to make just one cut. just one! not to mention the needed five others.

You don't need 5 others! Tramp's design is so STUPID and flawed after cutting through the base of a single bollard, smugglers can push the steel out of the way, allowing an adult to fit through the gap. Because the bollards are so tall — and are attached only to a panel at the very top — their length makes them easier to push aside once they have been cut and are left dangling.

 

[jc456]

to make just one cut. just one! not to mention the needed five others.

You don't need 5 others! Tramp's design is so STUPID and flawed after cutting through the base of a single bollard, smugglers can push the steel out of the way, allowing an adult to fit through the gap. Because the bollards are so tall — and are attached only to a panel at the very top — their length makes them easier to push aside once they have been cut and are left dangling.

prove it

 

[Yarddog]

More precisely, they TUNNEL into the US, some tunnels have rails....


drugs mexico tunnel - Google Search

Fine...the subject of this OP is cutting through it with a cordless disc cutter....impossible.

No, it is not at all impossible, but very easy.
Anyone claiming a diamond blade dulls quickly on concrete is just lying.
I have had the same masonry blade for over a decade, and it has easily cut through 4" thick concrete, totally over hundreds of linear feet by now. All you have to do is keep it cool by spraying it with a little water.

But that is NOT how you cut through these steel columns that are only filled with concrete.
With those columns, all you have to do is cut the surface steel with a sawsall blade. Then you whack the section with a sledge hammer, the remaining steel bend and peels, while the concrete shatters and turns to gravel.

A disc cutter will also cut through the steel, as long as you have the right blade.
This would do nicely for the steel.

I would need at least 1 extra battery though.

Sorry, no way with a skill saw your going to get the right angle you need to cut into those bars. The bars next to the one your cutting will be in your way...... hmmmm maybe that was by design though.

have you ever used a power tool before?

 

[WillPower]

A gas concrete saw will cut it like nobodys business. It would be my first choice

Now we're gettin somewhere.....uh, except they start at $900 assuming you'd buy a new one. So which blade to use..masonry or steel cutting....ya can't use both at the same time and the concrete is encased in at least 4 rebar rods. So you cut through the outer bollard casing and hit the concrete...instant end of the steel cutting blade. So a second cut above the first...now what? A plasma cutter to strip the outer casing away? Hmmmm...now what? Use a pickax to knock the concrete loose? Okay, and then the rebar gets cut...so now you got a hole about 9 inches wide...think Pedro can fit through it? Maybe. You can't pry it apart because the bollard next to it on either side ain't moving. Dang it....pull out the 30' ladder.

 

[edthecynic]

The breaches have been made using a popular cordless household tool known as a reciprocating saw that retails at hardware stores for as little as $100. When fitted with specialized blades, the saws can slice through one of the barrier’s steel-and-concrete bollards in a matter of minutes, according to the agents

Ah, so now it's a reciprocating saw....LMAO!!! So show me a pic of this breach.....I'll wait.

It always was a reciprocating saw, as you well know, YOU changed it to a disc saw because you are worthless lying "human scum!"

 

[WillPower]

It always was a reciprocating saw, as you well know, YOU changed it to a disc saw because you are worthless lying "human scum!"

Okay, so tell me how you deal with the inner-bollard..your insults aside. Got a pic by any chance? How about anecdotal testimony of somebody who did it? anything? hello?

 

[Likkmee]

Diamond but not with the notches

 

[edthecynic]

edtheycynic = define FASCIST for us....

I will let one of your heroes define it for you!
Fascism is definitely and absolutely opposed to the doctrines of liberalism, both in the political and the economic sphere.
- BENITO MUSSOLINI

 

[WillPower]

Diamond but not with the notches

You'd go through a couple dozen blades before the saw burned up....pretty pricey and it won't work....why not just apply for a visa?

 

[WEATHER53]

Libs
60 years ago

Apparently this SUB HUMAN thinks I am a "Lib" and that it doesn't matter that ISRAEL deliberately ATTACKED AND MURDERED the ship and crew of the USS Liberty...


Are you by chance a "Christian?"

Do you think if we wipe out all the "muzzies" in the Middle East that FRAUD JESUS will "float down from the clouds?"


Do you define conservative = Christian?



Patriotism = actually being against a foreign country attacking and murdering our men and women in uniform....

Name calling spittle all over the place while utterly fact vacant.

 

[Yarddog]

Yesterday I watched a plumber turn two diamond blades into junk and finally burn out his disc cutter on a DRY slab of concrete with no rebar inside it. And it wasn't cordless. Endless power and time to switch from masonry to metal cutting blades. So I figure this probable-HOAX story dreamed up by lying media rats and reported here to the glee of our leftist nitwits... is suspicious. I went searching for a legit pic of this supposed breach of Trump's border wall....and guess what? couldn't find one....not a single one. I did find this pic of a sample and it shows why nobody with a "hundred dollar cordless disc cutter is getting through a Trump steel bollard on the border.

Trump’s ‘virtually inpenetrable’ Mexico border wall is easy to cut with $100 saw from hardware store

Those cutaways look like they were done with a torch, but then all the metal would need to be removed in between your upper and lower cut before you could break out the concrete

 

[edthecynic]

It always was a reciprocating saw, as you well know, YOU changed it to a disc saw because you are worthless lying "human scum!"

Okay, so tell me how you deal with the inner-bollard..your insults aside. Got a pic by any chance? How about anecdotal testimony of somebody who did it? anything? hello?

The testimony comes from the border agents themselves, but you knew that already! Border and security experts, who "human scum" Tramp ignored, predicted that the wall would be a waste of money and easy for smugglers to beat.

 

[LaDairis]

I will let one of your heroes define it for you!

Sub human does not understand word sub human uses....

Fascism is definitely and absolutely opposed to the doctrines of liberalism

LMFAO!!!!!

Fascism = conservative

LOL!!!!!


What did the actual FASCISTS in the NAZI PARTY support???

1. SOCIALISM
2. GUN CONTROL/CONFISCATION
3. STATE SPONSORED DNA DISCRIMINATION
4. USING A BIASED/CONTROLLED MEDIA TO LIE TO THE PUBLIC
5. USING "HATE HOAXES" TO GAIN POWER
6. HAVING IDEOLOGICAL PURITY TESTS TO GET "FULL RIGHTS"
7. STATE SPONSORED ABORTION



Go back to 2nd grade and try to pass this time....