Illegals "Cutting Thru Trump's Wall" Another HOAX

[Lesh]

A gas concrete saw will cut it like nobodys business. It would be my first choice

Now we're gettin somewhere.....uh, except they start at $900 assuming you'd buy a new one. So which blade to use..masonry or steel cutting....ya can't use both at the same time and the concrete is encased in at least 4 rebar rods. So you cut through the outer bollard casing and hit the concrete...instant end of the steel cutting blade. So a second cut above the first...now what? A plasma cutter to strip the outer casing away? Hmmmm...now what? Use a pickax to knock the concrete loose? Okay, and then the rebar gets cut...so now you got a hole about 9 inches wide...think Pedro can fit through it? Maybe. You can't pry it apart because the bollard next to it on either side ain't moving. Dang it....pull out the 30' ladder.

You have no idea what you are talking about. My demo saw cuts through concrete with steel rebar in it like butter. Mine cost a grand. You can get a decent one for $500

 

[WillPower]

Yesterday I watched a plumber turn two diamond blades into junk and finally burn out his disc cutter on a DRY slab of concrete with no rebar inside it. And it wasn't cordless. Endless power and time to switch from masonry to metal cutting blades. So I figure this probable-HOAX story dreamed up by lying media rats and reported here to the glee of our leftist nitwits... is suspicious. I went searching for a legit pic of this supposed breach of Trump's border wall....and guess what? couldn't find one....not a single one. I did find this pic of a sample and it shows why nobody with a "hundred dollar cordless disc cutter is getting through a Trump steel bollard on the border.

Trump’s ‘virtually inpenetrable’ Mexico border wall is easy to cut with $100 saw from hardware store

Those cutaways look like they were done with a torch, but then all the metal would need to be removed in between your upper and lower cut before you could break out the concrete

They one looks more broken to me....torch the first side, cut it, and then use a spreader?

 

[WillPower]

You have no idea what you are talking about. My demo saw cuts through concrete with steel rebar in it like butter. Mine cost a grand. You can get a decent one for $500

I've caught you in these lies before....I doubt you could operate a miter saw much less what we're talking about....beat it.

 

[jc456]

I will let one of your heroes define it for you!

Sub human does not understand word sub human uses....

Fascism is definitely and absolutely opposed to the doctrines of liberalism

LMFAO!!!!!

Fascism = conservative

LOL!!!!!


What did the actual FASCISTS in the NAZI PARTY support???

1. SOCIALISM
2. GUN CONTROL/CONFISCATION
3. STATE SPONSORED DNA DISCRIMINATION
4. USING A BIASED/CONTROLLED MEDIA TO LIE TO THE PUBLIC
5. USING "HATE HOAXES" TO GAIN POWER
6. HAVING IDEOLOGICAL PURITY TESTS TO GET "FULL RIGHTS"
7. STATE SPONSORED ABORTION



Go back to 2nd grade and try to pass this time....

he thinks we're still in grade school under socialist care.

 

[Yarddog]

Yesterday I watched a plumber turn two diamond blades into junk and finally burn out his disc cutter on a DRY slab of concrete with no rebar inside it. And it wasn't cordless. Endless power and time to switch from masonry to metal cutting blades. So I figure this probable-HOAX story dreamed up by lying media rats and reported here to the glee of our leftist nitwits... is suspicious. I went searching for a legit pic of this supposed breach of Trump's border wall....and guess what? couldn't find one....not a single one. I did find this pic of a sample and it shows why nobody with a "hundred dollar cordless disc cutter is getting through a Trump steel bollard on the border.

Trump’s ‘virtually inpenetrable’ Mexico border wall is easy to cut with $100 saw from hardware store

Those cutaways look like they were done with a torch, but then all the metal would need to be removed in between your upper and lower cut before you could break out the concrete

They one looks more broken to me....torch the first side, cut it, and then use a spreader?

Maybe so, its also very difficult to cut away metal against concrete because there is nowhere for the slag to flow, well.... more so than when your just cutting away steel with nothing behind it. I'm thinking this we are looking at in the photo took quite a while to do and was done from both sides as a sample.

and then again, even if they make an upper and lower cut around the bar with a torch, they also need to make verticle cuts to remove the casing.... then break out the concrete

 

[edthecynic]

to make just one cut. just one! not to mention the needed five others.

You don't need 5 others! Tramp's design is so STUPID and flawed after cutting through the base of a single bollard, smugglers can push the steel out of the way, allowing an adult to fit through the gap. Because the bollards are so tall — and are attached only to a panel at the very top — their length makes them easier to push aside once they have been cut and are left dangling.

prove it

The smugglers already proved it and "human scum" Tramp already admitted it, as you well know!
Trump unfazed by reports that smugglers cut through Mexico border wall
President Donald Trump on Saturday downplayed reports that smugglers were cutting through the new tall sections of wall that he has said are fundamental to security along the U.S.-Mexico border.

"We have a very powerful wall," he said. "But no matter how powerful, you can cut through anything, in all fairness."

The president did not seem concerned about the possibility because "we have a lot of people watching" and "cutting is one thing, but it's easily fixed."

"One of the reasons we did it the way we did it, it's very easily fixed. You put the chunk back in,"

 

[Desperado]

So you are saying that it was OK for israel to attack the Liberty? You unAmerican piece of shit. Fuck you and Fuck Israel you traitor

Sure got a mouth on ya for a gutless bitch, eh?

Poor Traitor, upset that he is being called out for what he is.....
All for Israel and Screw the USA

 

[WillPower]

Yesterday I watched a plumber turn two diamond blades into junk and finally burn out his disc cutter on a DRY slab of concrete with no rebar inside it. And it wasn't cordless. Endless power and time to switch from masonry to metal cutting blades. So I figure this probable-HOAX story dreamed up by lying media rats and reported here to the glee of our leftist nitwits... is suspicious. I went searching for a legit pic of this supposed breach of Trump's border wall....and guess what? couldn't find one....not a single one. I did find this pic of a sample and it shows why nobody with a "hundred dollar cordless disc cutter is getting through a Trump steel bollard on the border.

Trump’s ‘virtually inpenetrable’ Mexico border wall is easy to cut with $100 saw from hardware store

Those cutaways look like they were done with a torch, but then all the metal would need to be removed in between your upper and lower cut before you could break out the concrete

Notice they're all cut/broken/melted away from the camera.....this section may have built this way just to show the guts of the bollard. Like I've been saying...you can do this in a machine shop...out in the open desert...no way.

They one looks more broken to me....torch the first side, cut it, and then use a spreader?

Maybe so, its also very difficult to cut away metal against concrete because there is nowhere for the slag to flow, well.... more so than when your just cutting away steel with nothing behind it. I'm thinking this we are looking at in the photo took quite a while to do and was done from both sides as a sample.

and then again, even if they make an upper and lower cut around the bar with a torch, they also need to make verticle cuts to remove the casing.... then break out the concrete

 

[WillPower]

Poor Traitor, upset that he is being called out for what he is.....
All for Israel and Screw the USA

PM me your address and tell me in person...pretty simple eh, punk?

 

[edthecynic]

What did the actual FASCISTS in the NAZI PARTY support???

1. SOCIALISM

Fucking LIAR!
"Socialism is a fraud, a comedy, a phantom, a blackmail."
- Benito Mussolini

 

[WEATHER53]

A gas concrete saw will cut it like nobodys business. It would be my first choice

Now we're gettin somewhere.....uh, except they start at $900 assuming you'd buy a new one. So which blade to use..masonry or steel cutting....ya can't use both at the same time and the concrete is encased in at least 4 rebar rods. So you cut through the outer bollard casing and hit the concrete...instant end of the steel cutting blade. So a second cut above the first...now what? A plasma cutter to strip the outer casing away? Hmmmm...now what? Use a pickax to knock the concrete loose? Okay, and then the rebar gets cut...so now you got a hole about 9 inches wide...think Pedro can fit through it? Maybe. You can't pry it apart because the bollard next to it on either side ain't moving. Dang it....pull out the 30' ladder.

You have no idea what you are talking about. My demo saw cuts through concrete with steel rebar in it like butter. Mine cost a grand. You can get a decent one for $500

Fake

 

[WillPower]

[QUOTE="j
The smugglers already proved it and "human scum" Tramp already admitted it, as you well know!
Trump unfazed by reports that smugglers cut through Mexico border wall
President Donald Trump on Saturday downplayed reports that smugglers were cutting through the new tall sections of wall that he has said are fundamental to security along the U.S.-Mexico border.

"We have a very powerful wall," he said. "But no matter how powerful, you can cut through anything, in all fairness."

The president did not seem concerned about the possibility because "we have a lot of people watching" and "cutting is one thing, but it's easily fixed."

"One of the reasons we did it the way we did it, it's very easily fixed. You put the chunk back in,"

Trump was responding to a reporter without any evidence...he does that you know....and the lying hyenas report it like an "admission"....The wall is fairly easy to repair...anybody with a brain can see that. So how about a pic like I asked for in the OP...without a pic you're just another lying commie turd.

 

[bripat9643]

A gas concrete saw will cut it like nobodys business. It would be my first choice

Now we're gettin somewhere.....uh, except they start at $900 assuming you'd buy a new one. So which blade to use..masonry or steel cutting....ya can't use both at the same time and the concrete is encased in at least 4 rebar rods. So you cut through the outer bollard casing and hit the concrete...instant end of the steel cutting blade. So a second cut above the first...now what? A plasma cutter to strip the outer casing away? Hmmmm...now what? Use a pickax to knock the concrete loose? Okay, and then the rebar gets cut...so now you got a hole about 9 inches wide...think Pedro can fit through it? Maybe. You can't pry it apart because the bollard next to it on either side ain't moving. Dang it....pull out the 30' ladder.

You have no idea what you are talking about. My demo saw cuts through concrete with steel rebar in it like butter. Mine cost a grand. You can get a decent one for $500

I don't believe that for a microsecond.

 

[jc456]

to make just one cut. just one! not to mention the needed five others.

You don't need 5 others! Tramp's design is so STUPID and flawed after cutting through the base of a single bollard, smugglers can push the steel out of the way, allowing an adult to fit through the gap. Because the bollards are so tall — and are attached only to a panel at the very top — their length makes them easier to push aside once they have been cut and are left dangling.

prove it

The smugglers already proved it and "human scum" Tramp already admitted it, as you well know!
Trump unfazed by reports that smugglers cut through Mexico border wall
President Donald Trump on Saturday downplayed reports that smugglers were cutting through the new tall sections of wall that he has said are fundamental to security along the U.S.-Mexico border.

"We have a very powerful wall," he said. "But no matter how powerful, you can cut through anything, in all fairness."

The president did not seem concerned about the possibility because "we have a lot of people watching" and "cutting is one thing, but it's easily fixed."

"One of the reasons we did it the way we did it, it's very easily fixed. You put the chunk back in,"

prove it, still waiting.

 

[Desperado]

Poor Traitor, upset that he is being called out for what he is.....
All for Israel and Screw the USA

PM me your address and tell me in person...pretty simple eh, punk?

So you are not denying you are and Israeli firster and put them above the priorities of the United States?

 

[edthecynic]

[QUOTE="j
The smugglers already proved it and "human scum" Tramp already admitted it, as you well know!
Trump unfazed by reports that smugglers cut through Mexico border wall
President Donald Trump on Saturday downplayed reports that smugglers were cutting through the new tall sections of wall that he has said are fundamental to security along the U.S.-Mexico border.

"We have a very powerful wall," he said. "But no matter how powerful, you can cut through anything, in all fairness."

The president did not seem concerned about the possibility because "we have a lot of people watching" and "cutting is one thing, but it's easily fixed."

"One of the reasons we did it the way we did it, it's very easily fixed. You put the chunk back in,"

Trump was responding to a reporter without any evidence...he does that you know....and the lying hyenas report it like an "admission"....The wall is fairly easy to repair...anybody with a brain can see that. So how about a pic like I asked for in the OP...without a pic you're just another lying commie turd.

The wall would not have to be FIXED/REPAIRED if it wasn't already cut through!!!!
DUH!

 

[Yarddog]

to make just one cut. just one! not to mention the needed five others.

You don't need 5 others! Tramp's design is so STUPID and flawed after cutting through the base of a single bollard, smugglers can push the steel out of the way, allowing an adult to fit through the gap. Because the bollards are so tall — and are attached only to a panel at the very top — their length makes them easier to push aside once they have been cut and are left dangling.

prove it

The smugglers already proved it and "human scum" Tramp already admitted it, as you well know!
Trump unfazed by reports that smugglers cut through Mexico border wall
President Donald Trump on Saturday downplayed reports that smugglers were cutting through the new tall sections of wall that he has said are fundamental to security along the U.S.-Mexico border.

"We have a very powerful wall," he said. "But no matter how powerful, you can cut through anything, in all fairness."

The president did not seem concerned about the possibility because "we have a lot of people watching" and "cutting is one thing, but it's easily fixed."

"One of the reasons we did it the way we did it, it's very easily fixed. You put the chunk back in,"

If its all true and they are cutting through the wall, then that makes it pretty clear that we DO need a wall to keep these people out. If you have Cartels willing to cut through, then why would you want to leave these people an open border to just walk through? build the wall... put troops on the border to back up the current border patrol who are too under staffed to monitor the wall. Bring some troops home that we have sitting in Germany.

You all make no sense other than we understand you don't like Trump. Democrats used to call for a wall being built as well until they figured out that it wasnt popular with their voting block so they flipped their position. Then true to form, they call other people racist for wanting to enforce border laws

 

[Lesh]

I don't believe that for a microsecond.

Based on what?

You don't even know what a demo saw looks like ya friggin tard

 

[WillPower]

So you are not denying you are and Israeli firster and put them above the priorities of the United States?

I'm telling you I'm an ex-1st Cav intel non-com (llF40) who saw signal intel we got from Israel detailing the Soviet air-defenses built around Hanoi....anything else, punk?

 

[edthecynic]

to make just one cut. just one! not to mention the needed five others.

You don't need 5 others! Tramp's design is so STUPID and flawed after cutting through the base of a single bollard, smugglers can push the steel out of the way, allowing an adult to fit through the gap. Because the bollards are so tall — and are attached only to a panel at the very top — their length makes them easier to push aside once they have been cut and are left dangling.

prove it

The smugglers already proved it and "human scum" Tramp already admitted it, as you well know!
Trump unfazed by reports that smugglers cut through Mexico border wall
President Donald Trump on Saturday downplayed reports that smugglers were cutting through the new tall sections of wall that he has said are fundamental to security along the U.S.-Mexico border.

"We have a very powerful wall," he said. "But no matter how powerful, you can cut through anything, in all fairness."

The president did not seem concerned about the possibility because "we have a lot of people watching" and "cutting is one thing, but it's easily fixed."

"One of the reasons we did it the way we did it, it's very easily fixed. You put the chunk back in,"

prove it, still waiting.

Don't have to, "human scum" Tramp already confessed!
Are you calling him a liar?????