Sorry bout that,
Sorry bout that,
1. Seeing I'm the smartest motherfucker on the planet.

2. Here's what I propose to do to plug it.
3. Seeing its a pipe these leaks are coming from, all that has to be done is to know the overall size of this pipe, then make a special sleave thats some what bigger than it, so its easy enough to slip over the mouth where the oil is gushing.
4. Then inside of this pipe we make, is a special stainless steel expandable sleave that will crank down on the outside of the pipe once its installed.
5. For a short time the oil will flow through it, until a valve is screwed in like a common water valve, ofcourse made of stainless steel.
6. Problem solved, and yes I'm from TEXAS!!!!!
Regards,
SirJamesodfTexas
You sound kinda foolish man, no offense. The Pipe was Damaged, and they had trouble getting a seal to it because of that. When they put the last cap on it, the Fear was the cap would work so well, the Damaged Pipe Casing under ground would rapture and then sealing it would be near impossible.
Experts from around the world worked on this leak to get it plugged. It was by no means an easy engineering Challenge. The Depth of the Water alone made it much like trying to plug a leak in Space, only you can not send men to do it. It was all by remote control.
While it is true Government Limits shallow water drilling, do not kid yourself they would still drill deep to. You go where the Oil is. What I fault Obama for in that Speech, was when he CLAIMED the only reason they are drilling that deep is because we are running out of oil closer to shore and on land. THAT IS A LIE, but BP or someone would be drilling deep with or with out the Government restraints on easier drilling.
You sound Foolish acting like you have the answers.
1. I was just blowing off some steam, and joking ofcourse at the same time.
2. A hellofvalot of what I post has a slight bit of humor in it.
3. Most people catch on to that right away.
4. I think BP's biggest fear was the loss of the oil.
5. There it was gushing out, and they couldn't gather it up fast enough before the salt water got to it.
6. They tried all sorts of ways to gather the oil.
7. Nothing worked well enough.
8. So after my scathing thread they got busy and plugged the bastard!
9. I did have the answer this time, and I usually do, but not always.
10. I am with you on the oil being everywhere under ground, we can just about drill for it and never miss, if we wanted too.
Regards,
SirJamesofTexas