WTC-7 Was A Controlled Demolition Inside Job

[SFC Ollie]

heres a good article on wt7.Of course the OCTA'S here will close their eyes and cover their ears since it doesnt along with their version of events.

Top Construction Firm: WTC Destroyed By Controlled Demolition

Nutjob, we always look to see what you come up with. this one is almost as funny as most of them.

"Respected Middle East expert and former BBC presenter Alan Hart has broken his silence on 9/11, by revealing that the world’s most prominent civil engineering company told him directly that the collapse of the twin towers was a controlled demolition."

That is from your link. Please explain to us why he doesn't bother to and in fact steers clear of naming this company.......

 

[DiveCon]

heres a good article on wt7.Of course the OCTA'S here will close their eyes and cover their ears since it doesnt along with their version of events.

Top Construction Firm: WTC Destroyed By Controlled Demolition

Nutjob, we always look to see what you come up with. this one is almost as funny as most of them.

"Respected Middle East expert and former BBC presenter Alan Hart has broken his silence on 9/11, by revealing that the world’s most prominent civil engineering company told him directly that the collapse of the twin towers was a controlled demolition."

That is from your link. Please explain to us why he doesn't bother to and in fact steers clear of naming this company.......

because it is a total LIE

 

[SFC Ollie]

Also Barry Jennings testimony ALONE proves wt7 was a controlled demolition.Jennings died after being admitted into a hospital only days before the release of the NIST report on wt7.as it says,its very unusual and controversial that a very prominent 9/11 witness would die only days before the release of the NIST report on wt7.
Key Witness to WTC 7 Explosions Dead at 53

especially after a firestorm erupted over his testimony that he heard explosions inside the buildings prior to the collapse of either tower and that there were dead bodies in the buildings blown out lobby. Coincidental? like hell.Just like the kennedy assassination where so many witnesses who reported seeing a second gunman behind the picket fence started dying in mysterious deaths since their version did not go along with the warren commissions.

History repeats itself.

everything else said on this thread ia all for naught because his witness testimony along with the fact that NASA recorded fire temperatures weeks later after 9/11 to be far too intense to be that of office or jet fuel fires makes everhting else mentioned on this thread pointless and all for naught.wt7 is the crox of the 9/11 coverup that the OCTA'S here cant get around and they know it.

People die, none of us will get out of here alive.

And the temperatures, what is it that caused these readings? Is this your nano thermite? I don't think so since thermite only burns for a few moments. You've got some explaining to do on that one.

 

[DiveCon]

Also Barry Jennings testimony ALONE proves wt7 was a controlled demolition.Jennings died after being admitted into a hospital only days before the release of the NIST report on wt7.as it says,its very unusual and controversial that a very prominent 9/11 witness would die only days before the release of the NIST report on wt7.
Key Witness to WTC 7 Explosions Dead at 53

especially after a firestorm erupted over his testimony that he heard explosions inside the buildings prior to the collapse of either tower and that there were dead bodies in the buildings blown out lobby. Coincidental? like hell.Just like the kennedy assassination where so many witnesses who reported seeing a second gunman behind the picket fence started dying in mysterious deaths since their version did not go along with the warren commissions.

History repeats itself.

everything else said on this thread ia all for naught because his witness testimony along with the fact that NASA recorded fire temperatures weeks later after 9/11 to be far too intense to be that of office or jet fuel fires makes everhting else mentioned on this thread pointless and all for naught.wt7 is the crox of the 9/11 coverup that the OCTA'S here cant get around and they know it.

People die, none of us will get out of here alive.

And the temperatures, what is it that caused these readings? Is this your nano thermite? I don't think so since thermite only burns for a few moments. You've got some explaining to do on that one.

hey hearing explosive sounds 5 hours before a building collapses is proof positive it was a controlled demolition'

 

[eots]

Also Barry Jennings testimony ALONE proves wt7 was a controlled demolition.Jennings died after being admitted into a hospital only days before the release of the NIST report on wt7.as it says,its very unusual and controversial that a very prominent 9/11 witness would die only days before the release of the NIST report on wt7.
Key Witness to WTC 7 Explosions Dead at 53

especially after a firestorm erupted over his testimony that he heard explosions inside the buildings prior to the collapse of either tower and that there were dead bodies in the buildings blown out lobby. Coincidental? like hell.Just like the kennedy assassination where so many witnesses who reported seeing a second gunman behind the picket fence started dying in mysterious deaths since their version did not go along with the warren commissions.

History repeats itself.

everything else said on this thread ia all for naught because his witness testimony along with the fact that NASA recorded fire temperatures weeks later after 9/11 to be far too intense to be that of office or jet fuel fires makes everhting else mentioned on this thread pointless and all for naught.wt7 is the crox of the 9/11 coverup that the OCTA'S here cant get around and they know it.

People die, none of us will get out of here alive.

And the temperatures, what is it that caused these readings? Is this your nano thermite? I don't think so since thermite only burns for a few moments. You've got some explaining to do on that one.

dont be stupid.. if it is hot enough to melt through the steel iit matters not how long it burns for the temperature required is still the same...here is a clue.. the steel gets hot

 

[SFC Ollie]

Also Barry Jennings testimony ALONE proves wt7 was a controlled demolition.Jennings died after being admitted into a hospital only days before the release of the NIST report on wt7.as it says,its very unusual and controversial that a very prominent 9/11 witness would die only days before the release of the NIST report on wt7.
Key Witness to WTC 7 Explosions Dead at 53

especially after a firestorm erupted over his testimony that he heard explosions inside the buildings prior to the collapse of either tower and that there were dead bodies in the buildings blown out lobby. Coincidental? like hell.Just like the kennedy assassination where so many witnesses who reported seeing a second gunman behind the picket fence started dying in mysterious deaths since their version did not go along with the warren commissions.

History repeats itself.

everything else said on this thread ia all for naught because his witness testimony along with the fact that NASA recorded fire temperatures weeks later after 9/11 to be far too intense to be that of office or jet fuel fires makes everhting else mentioned on this thread pointless and all for naught.wt7 is the crox of the 9/11 coverup that the OCTA'S here cant get around and they know it.

People die, none of us will get out of here alive.

And the temperatures, what is it that caused these readings? Is this your nano thermite? I don't think so since thermite only burns for a few moments. You've got some explaining to do on that one.

dont be stupid.. if it is hot enough to melt through the steel iit matters not how long it burns for the temperature required is still the same...here is a clue.. the steel gets hot

No shit Sherlock? Ever used thermite? I have.

 

[eots]

People die, none of us will get out of here alive.

And the temperatures, what is it that caused these readings? Is this your nano thermite? I don't think so since thermite only burns for a few moments. You've got some explaining to do on that one.

dont be stupid.. if it is hot enough to melt through the steel iit matters not how long it burns for the temperature required is still the same...here is a clue.. the steel gets hot

No shit Sherlock? Ever used thermite? I have.

yes indeed I did..and I would not surprised if much more so than you...but regardless that is the answer to your question

 

[SFC Ollie]

In general, has anyone else ever noticed that people always know more than you, or did more than you , or is better than you? Do you ever believe them?

 

[eots]

In general, has anyone else ever noticed that people always know more than you, or did more than you , or is better than you? Do you ever believe them?

I worked for over ten years in ship husbandry doing underwater maintenance and repairs..what else I am supposed to say...you are the one that asked...further more the answer to your question remains the same

 

[DiveCon]

In general, has anyone else ever noticed that people always know more than you, or did more than you , or is better than you? Do you ever believe them?

I worked for over ten years in ship husbandry doing underwater maintenance and repairs..what else I am supposed to say...you are the one that asked...further more the answer to your question remains the same

do you have a link showing that thermite is used in that industry?

 

[SFC Ollie]

In general, has anyone else ever noticed that people always know more than you, or did more than you , or is better than you? Do you ever believe them?

I worked for over ten years in ship husbandry doing underwater maintenance and repairs..what else I am supposed to say...you are the one that asked...further more the answer to your question remains the same

do you have a link showing that thermite is used in that industry?

I have to wonder what one would use thermite for when doing repairs on a ship........

 

[Jeremy]

I worked for over ten years in ship husbandry doing underwater maintenance and repairs..what else I am supposed to say...you are the one that asked...further more the answer to your question remains the same

do you have a link showing that thermite is used in that industry?

I have to wonder what one would use thermite for when doing repairs on a ship........

Just ask the Titanic conspiritors.

Than again, the "White Star Line" lied about the hull being made of steel. It was actualy made of concrete.

 

[eots]

yes of course you do Ollie..because you are inexperienced

​

An underwater cutting tool for steel, concrete, or the like, comprising a tubular oxygen lance (10) adapted to be connected to an oxygen source (24, 25) and having a pistol grip-like handle (16).The priming or firing substance preferably is iron thermite. Prior to its first use the lance is sealed so as to be ignited safely under water. This seal (12) is adapted to be blasted off or fused by means of an igniter unit (14) which is operable under water, at the same time, firing the oxygen flowing out of the lance (10). The seal (12) preferably is formed by a plug of a material which is easily inflammable or contains such material and hermetically seals the free end of the lance (10).

Underwater cutting tool - Patent 4477060

 

[SFC Ollie]

I'll have to ask my Grandson about this, he is a damage control specialist in the Navy. I'm sure he can tell me all about it. And I am far from inexperienced dipshit.

 

[DiveCon]

yes of course you do Ollie..because you are inexperienced

​

An underwater cutting tool for steel, concrete, or the like, comprising a tubular oxygen lance (10) adapted to be connected to an oxygen source (24, 25) and having a pistol grip-like handle (16).The priming or firing substance preferably is iron thermite. Prior to its first use the lance is sealed so as to be ignited safely under water. This seal (12) is adapted to be blasted off or fused by means of an igniter unit (14) which is operable under water, at the same time, firing the oxygen flowing out of the lance (10). The seal (12) preferably is formed by a plug of a material which is easily inflammable or contains such material and hermetically seals the free end of the lance (10).

Underwater cutting tool - Patent 4477060

notice the thermite is only to IGNITE it
and its not cutting/welding anything

 

[eots]

yes of course you do Ollie..because you are inexperienced

​

An underwater cutting tool for steel, concrete, or the like, comprising a tubular oxygen lance (10) adapted to be connected to an oxygen source (24, 25) and having a pistol grip-like handle (16).The priming or firing substance preferably is iron thermite. Prior to its first use the lance is sealed so as to be ignited safely under water. This seal (12) is adapted to be blasted off or fused by means of an igniter unit (14) which is operable under water, at the same time, firing the oxygen flowing out of the lance (10). The seal (12) preferably is formed by a plug of a material which is easily inflammable or contains such material and hermetically seals the free end of the lance (10).

Underwater cutting tool - Patent 4477060

notice the thermite is only to IGNITE it
and its not cutting/welding anything

are you trying to imply you can not weld or cut with thermite ?

 

[eots]

I'll have to ask my Grandson about this, he is a damage control specialist in the Navy. I'm sure he can tell me all about it. And I am far from inexperienced dipshit.

ya you do that...and then ask them if the navy contracts out the majority of its underwater ship husbandry to the private sector...ie.. hull maintenance..cathodic protection systems repairs,zinc replacement.propeller polishing,non-destructive testing ,hull surveys. replacement and repairs of sonar domes etc...

 

[eots]

I'll have to ask my Grandson about this, he is a damage control specialist in the Navy. I'm sure he can tell me all about it. And I am far from inexperienced dipshit.

in the field of welding and diving, you most certainly are

 

[DiveCon]

yes of course you do Ollie..because you are inexperienced

​

An underwater cutting tool for steel, concrete, or the like, comprising a tubular oxygen lance (10) adapted to be connected to an oxygen source (24, 25) and having a pistol grip-like handle (16).The priming or firing substance preferably is iron thermite. Prior to its first use the lance is sealed so as to be ignited safely under water. This seal (12) is adapted to be blasted off or fused by means of an igniter unit (14) which is operable under water, at the same time, firing the oxygen flowing out of the lance (10). The seal (12) preferably is formed by a plug of a material which is easily inflammable or contains such material and hermetically seals the free end of the lance (10).

Underwater cutting tool - Patent 4477060

notice the thermite is only to IGNITE it
and its not cutting/welding anything

are you trying to imply you can not weld or cut with thermite ?

not saying that at all

but what you posted DOES
you havent shown proof that thermite is used to either WELD or CUT underwater

 

[eots]

notice the thermite is only to IGNITE it
and its not cutting/welding anything

are you trying to imply you can not weld or cut with thermite ?

not saying that at all

but what you posted DOES
you havent shown proof that thermite is used to either WELD or CUT underwater

oh STFU