Are you part of the Climate cult?

[Robert W]

Do you believe that the burning vegetation melted the tires of cars on pavement?

I don't know about that. But the fuel for the fire was so vast, the place is almost totally destroyed.

 

[EMH]

A small camp fire is 1,100ºF ... and you know tires themselves actually burn ...

I have personally witness a wildfire consuming an entire living tree !!! ... swear to God I did ...

A simple scientific analysis of the Maui fire

Well, let's check this out. A road, filled with cars. On one side, ocean spraying it all day, the other side, houses that were burned by "wildfire..." got that... Heat is supposed to rise, actually, not go down and sideways. You see here cars on pavement with tires melted, dash...

www.usmessageboard.com

As you can see in the OP of the link, the melted tires are not right above a "campfire." They are on pavement with fire on ONE SIDE and ocean spraying waves on the other...

1100F is way way off...

Something heated that pavement, and it wasn't a "fire" caused by global "warming" on an island with NO WARMING in the temp data....

 

[EMH]

When fully burning in open air it can reach nearly 2000 degrees.

bullshit.

 

[ReinyDays]

A simple scientific analysis of the Maui fire

Well, let's check this out. A road, filled with cars. On one side, ocean spraying it all day, the other side, houses that were burned by "wildfire..." got that... Heat is supposed to rise, actually, not go down and sideways. You see here cars on pavement with tires melted, dash...

www.usmessageboard.com

As you can see in the OP of the link, the melted tires are not right above a "campfire." They are on pavement with fire on ONE SIDE and ocean spraying waves on the other...

1100F is way way off...

Something heated that pavement, and it wasn't a "fire" caused by global "warming" on an island with NO WARMING in the temp data....

Were you there? ... have you ever been in a wildfire? ...

Didn't think so ... did mommy let you on her computer again? ...

 

[EMH]

Were you there? ... have you ever been in a wildfire? ...

Didn't think so ... did mommy let you on her computer again? ...

You are a Jew Supremacist Zionist Fascist lying to cover up the mass murder of Americans on Hawaii...

 

[Woodznutz]

bullshit.

This.
The jet fuel burned very hot in the trade tower because of the enormous draft created by the fire.

how hot does jet fuel burn in fahrenheit - Bing

Intelligent search from Bing makes it easier to quickly find what you’re looking for and rewards you.

www.bing.com

 

[EMH]

This.
The jet fuel burned very hot in the trade tower because of the enormous draft created by the fire.

how hot does jet fuel burn in fahrenheit - Bing

Intelligent search from Bing makes it easier to quickly find what you’re looking for and rewards you.

www.bing.com

bullshit

The vast majority of the jet fuel blew out the other side in a massive fireball. The rest was scattered and completely burned out in a few minutes. What caused this was thermite, part of controlled demolition of steel framed skyscrapers...

 

[Woodznutz]

bullshit

The vast majority of the jet fuel blew out the other side in a massive fireball. The rest was scattered and completely burned out in a few minutes. What caused this was thermite, part of controlled demolition of steel framed skyscrapers...

Pretty convenient. The thermite was ignited at the same time the plane hit the building. Was unignited thermite found in the other debris?

 

[EMH]

Pretty convenient. The thermite was ignited at the same time the plane hit the building. Was unignited thermite found in the other debris?

https://www.nist.gov/system/files/documents/2017/04/28/AE911Truth-NIST-Written-Submission12-18-07.pdf

Response to NIST’s Invitation for Written Comments Documentation of spoken remarks presented on December 18 conference call with the NCST Advisory Committee Emailed to NIST on January 4, 2007

Richard Gage, AIA – Architects & Engineers for 9/11 Truth I’m Richard Gage, AIA, a licensed architect of 20 years. I represent Architects and Engineers for 9/11 Truth,1 a fast-growing body of more than 230 architects and engineers dedicated solely to bringing out the truth about all three high-rise building collapses on 9/11. We believe that we have answers to your questions about the puzzling collapse of World Trade Center 7.In more than 100 steel-framed, high-rise fires (most of them very hot, very large and very long lasting), not one has collapsed, ever. So it behooves all of us, as your own former chief of NIST’s Fire Science Division, Dr. James Quintiere, said, “to look at real alternatives that might have been the cause of these collapses.”2Let’s start with temperatures – 1,340˚ F. temperatures, recorded in thermal images of the surface of the World Trade Center rubble pile a week after 9/11 by NASA’s AVIRIS equipment on USGS overflights.3 Such temperatures cannot be achieved by oxygen-starved hydrocarbon fires. Such fires burn at only 600 to 800˚ F.4 Remember, there was no fire on the top of the pile. The source of this incredible heat was therefore below the surface of the rubble, where it must have been far hotter than 1,340 degrees. Mark Loizeaux, president of Controlled Demolition, Inc., who was hired for the Building 7cleanup, said that “molten steel was found at 7 WTC.”5 Leslie Robertson, World Trade Center structural engineer, stated that on October 5, “21 days after the attacks, the fires were still burning and molten steel was still running.”6 Fire department personnel, recorded on video ,reported seeing “molten steel running down the channel rails… like you're in a foundry – like lava from a volcano.”7 Joe O’Toole, a Bronx firefighter, saw a crane lifting a steel beam vertically from deep within a pile. He said “it was dripping from the molten steel.”8 Bart Voorsanger, an architect hired to save “relics from the rubble,” stated about the multi-ton“meteorite” that it was a “fused element of molten steel and concrete.”9The knowledge that this evidence even exists was denied by one of your top engineers, John Gross, in his appearance at the University of Texas in April of this year.10Steel melts at about 2,850 degrees Fahrenheit, about twice the temperature of the World Trade Center Tower 1 and 2 fires as estimated by NIST. So what melted the steel?


Appendix C of FEMA’s BPAT Report (attached to this email) documents steel samples showing rapid oxidation, sulfidation, and intergranular melting.11 A liquid eutectic mixture, including sulfur from an unknown source, caused intense corrosion of the steel, gaping holes in wide flange beams, and the thinning of half-inch-thick flanges to almost razor-sharpness in the World Trade Center 7 steel. The New York Times called this “the deepest mystery uncovered in the investigation.”NIST left all of this crucial forensic evidence out of its report. Why? Because it didn’t fit in with the official conspiracy theory .Last year, physicist Steven Jones, two other physicists, and a geologist analyzed the slag at the ends of the beams and in the samples of the previously molten metal.12 They found iron, aluminum, sulfur, manganese and fluorine – the chemical evidence of thermate, a high-tech incendiary cutting charge used by the military to cut through steel like a hot knife through butter .The by-product of the thermate reaction is molten iron! There’s no other possible source for all the molten iron that was found. One of thermate’s key ingredients is sulfur, which can form the liquid eutectic that FEMA found and lower the melting point of steel.

 

[Woodznutz]

https://www.nist.gov/system/files/documents/2017/04/28/AE911Truth-NIST-Written-Submission12-18-07.pdf

Response to NIST’s Invitation for Written Comments Documentation of spoken remarks presented on December 18 conference call with the NCST Advisory Committee Emailed to NIST on January 4, 2007

Richard Gage, AIA – Architects & Engineers for 9/11 Truth I’m Richard Gage, AIA, a licensed architect of 20 years. I represent Architects and Engineers for 9/11 Truth,1 a fast-growing body of more than 230 architects and engineers dedicated solely to bringing out the truth about all three high-rise building collapses on 9/11. We believe that we have answers to your questions about the puzzling collapse of World Trade Center 7.In more than 100 steel-framed, high-rise fires (most of them very hot, very large and very long lasting), not one has collapsed, ever. So it behooves all of us, as your own former chief of NIST’s Fire Science Division, Dr. James Quintiere, said, “to look at real alternatives that might have been the cause of these collapses.”2Let’s start with temperatures – 1,340˚ F. temperatures, recorded in thermal images of the surface of the World Trade Center rubble pile a week after 9/11 by NASA’s AVIRIS equipment on USGS overflights.3 Such temperatures cannot be achieved by oxygen-starved hydrocarbon fires. Such fires burn at only 600 to 800˚ F.4 Remember, there was no fire on the top of the pile. The source of this incredible heat was therefore below the surface of the rubble, where it must have been far hotter than 1,340 degrees. Mark Loizeaux, president of Controlled Demolition, Inc., who was hired for the Building 7cleanup, said that “molten steel was found at 7 WTC.”5 Leslie Robertson, World Trade Center structural engineer, stated that on October 5, “21 days after the attacks, the fires were still burning and molten steel was still running.”6 Fire department personnel, recorded on video ,reported seeing “molten steel running down the channel rails… like you're in a foundry – like lava from a volcano.”7 Joe O’Toole, a Bronx firefighter, saw a crane lifting a steel beam vertically from deep within a pile. He said “it was dripping from the molten steel.”8 Bart Voorsanger, an architect hired to save “relics from the rubble,” stated about the multi-ton“meteorite” that it was a “fused element of molten steel and concrete.”9The knowledge that this evidence even exists was denied by one of your top engineers, John Gross, in his appearance at the University of Texas in April of this year.10Steel melts at about 2,850 degrees Fahrenheit, about twice the temperature of the World Trade Center Tower 1 and 2 fires as estimated by NIST. So what melted the steel?


Appendix C of FEMA’s BPAT Report (attached to this email) documents steel samples showing rapid oxidation, sulfidation, and intergranular melting.11 A liquid eutectic mixture, including sulfur from an unknown source, caused intense corrosion of the steel, gaping holes in wide flange beams, and the thinning of half-inch-thick flanges to almost razor-sharpness in the World Trade Center 7 steel. The New York Times called this “the deepest mystery uncovered in the investigation.”NIST left all of this crucial forensic evidence out of its report. Why? Because it didn’t fit in with the official conspiracy theory .Last year, physicist Steven Jones, two other physicists, and a geologist analyzed the slag at the ends of the beams and in the samples of the previously molten metal.12 They found iron, aluminum, sulfur, manganese and fluorine – the chemical evidence of thermate, a high-tech incendiary cutting charge used by the military to cut through steel like a hot knife through butter .The by-product of the thermate reaction is molten iron! There’s no other possible source for all the molten iron that was found. One of thermate’s key ingredients is sulfur, which can form the liquid eutectic that FEMA found and lower the melting point of steel.

This suggests a conspiracy involving America and Saudi Arabia.

 

[EMH]

This suggests a conspiracy involving America and Saudi Arabia.

Why was Epstein's #1 customer Saudi Crown Prince bin Salman???

Why did Putin on 913 say it was the US, Israel, AND Saudi??

saudi royal family jewish at DuckDuckGo

DuckDuckGo. Privacy, Simplified.

duckduckgo.com

 

[Woodznutz]

Why was Epstein's #1 customer Saudi Crown Prince bin Salman???

Why did Putin on 913 say it was the US, Israel, AND Saudi??

saudi royal family jewish at DuckDuckGo

DuckDuckGo. Privacy, Simplified.

duckduckgo.com

I wouldn't be surprised.