I'd enjoy an intellectual discussion-

No sign of resistance at all when they started collapsing......

Weird.
Explain Angelo.

How does something falling due to gravity and experiencing no resistance fall at -6.31 m/s2! I supposed that's free fall to a truther eh?

:auiqs.jpg:
 
Now that we've settled that, what happened to the missing jolts ? Why was there no resistance from the underlying columns when the collapse initiated?

Your house of cards is an illusion.
The same reason the Surfside building collapsed when pieces of the building fell. The beams were not designed to support the weight of the impact.
 
Concrete pieces falling in the Surfside building is what brought down the rest of the building. The pieces must have been pretty heavy.

So if 1 plane hit at the top and the other plane hit in the middle , then how did they collapse almost identically the same way ?
 
So if 1 plane hit at the top and the other plane hit in the middle , then how did they collapse almost identically the same way ?
The planes must not have had enough force when compared to the strength of the building. And, once the collapse started, it continued under its own weight.
 
You can balance a 35lb cinder block on 4 toothpicks and even if you stood on top of it , the toothpicks would break but they wouldn't collapse straight down..... illustrates the strength of vertical columns.
All you need do is remove some wooden blocks for the rest to fall.
71kaKRINJ0L._AC_SL1500_.jpg
 
The planes must not have had enough force when compared to the strength of the building. And, once the collapse started, it continued under its own weight.
If a fully loaded 18-wheeler had a head-on collision with an SUV, each traveling at 80 mph, both vehicles would come to a stop at the impact point. ( the suv would be pushed back a hundred feet or so, but it would stop the semi) .
 
Last edited:

Forum List

Back
Top