Steel Floor Panels, Metal Decking on each Floor in the WTC Buildings

[creativedreams]

The World Trade Center buildings had steel floor panels on each floor that layered over the trusses and had a layer of concrete poured on them.

What happened to all these sheets of steel panels that made up the metal decking for each floor? Why aren't many in the debris pile?

 

[rightwinger]

Ummmmm...

Aliens zapped them with death rays?

 

[creativedreams]

Ummmmm...

Aliens zapped them with death rays?

Funny...look at all the images of ground zero and it shows nothing but structural steel left and virtually everything else was exploded into pulverized dust....including pretty much all of the steel floor panels making up the metal decking for each floor...

 

[rightwinger]

Ummmmm...

Aliens zapped them with death rays?

Funny...look at all the images of ground zero and it shows nothing but structural steel left and virtually everything else was exploded into pulverized dust....including pretty much all of the steel floor panels making up the metal decking for each floor...

I'm with you bro...

Death rays are the only logical answer. They couldn't have been pulverized in the collapse, that would be stupid

 

[bigrebnc1775]

The World Trade Center buildings had steel floor panels on each floor that layered over the trusses and had a layer of concrete poured on them.

What happened to all these sheets of steel panels that made up the metal decking for each floor? Why aren't many in the debris pile?

One thing you picture doesn't show is the wire mesh in the concert. and to join a fresh poured slab of concert they drill holes for rebar that will be exposed for the next pour, or will have rebar from the slab that was just poured sticking out 6 to 7 inches for the next pour.

 

[Mr. H.]

How thick were those steel floor panels?

 

[bigrebnc1775]

How thick were those steel floor panels?

The standard slab thickness is 4 and 5 /8 inches thick.

 

[creativedreams]

How thick were those steel floor panels?

The standard slab thickness is 4 and 5 /8 inches thick.

So are you saying there is a net of mesh wire spanning every floor?

If there was what could have happened to the massive amounts of wire netting from each floor?

 

[creativedreams]

How thick were those steel floor panels?

The standard slab thickness is 4 and 5 /8 inches thick.

I think he was referring to the metal sheeting...not sure what gauge of metal was used

 

[bigrebnc1775]

How thick were those steel floor panels?

The standard slab thickness is 4 and 5 /8 inches thick.

So are you saying there is a net of mesh wire spanning every floor?

If there was what could have happened to the massive amounts of wire netting from each floor?

If done right yes
Here's an example of what the wire mesh would look like before a pour

 

[bigrebnc1775]

How thick were those steel floor panels?

The standard slab thickness is 4 and 5 /8 inches thick.

I think he was referring to the metal sheeting...not sure what gauge of metal was used

The decking is about 16 gauge thickness but to be more correct 0.8 - 1.2mm

 

[creativedreams]

The standard slab thickness is 4 and 5 /8 inches thick.

So are you saying there is a net of mesh wire spanning every floor?

If there was what could have happened to the massive amounts of wire netting from each floor?

If done right yes
Here's an example of what the wire mesh would look like before a pour

There is technology to paint on explosives....very high tech and powerful...

If painted on floor trusses as fireproofing or under the floor decking as fireproofing then it could account for this.

The World Trade Centers just happened to be under construction renovations to paint structural steel and to re-fireproof.

Perhaps it could explain some of this video...

[ame="http://http://www.youtube.com/watch?v=BnR4A4zb8B0"]http://http://www.youtube.com/watch?v=BnR4A4zb8B0[/ame]

[ame="http://http://www.youtube.com/watch?v=EgN080yySe0"]http://http://www.youtube.com/watch?v=EgN080yySe0[/ame]

 

[bigrebnc1775]

So are you saying there is a net of mesh wire spanning every floor?

If there was what could have happened to the massive amounts of wire netting from each floor?

If done right yes
Here's an example of what the wire mesh would look like before a pour

There is technology to paint on explosives....very high tech and powerfull...

If painted on floor trusses as fireproofing or under the floor decking as fireproofing then it could account for this.

The World Trade Centers just happened to be under construction renovations to paint structural steel and to re-fireproof.

Perhaps it could explain some of this video...

[ame="http://http://www.youtube.com/watch?v=BnR4A4zb8B0"]http://http://www.youtube.com/watch?v=BnR4A4zb8B0[/ame]

[ame="http://http://www.youtube.com/watch?v=EgN080yySe0"]http://http://www.youtube.com/watch?v=EgN080yySe0[/ame]

Concert when it get's hot enough will explode. Fireproofing isn't painted on it's like a wool looking substance that is applied to metal structure in a wet forms It can be removed easily if hit.

 

[creativedreams]

If done right yes
Here's an example of what the wire mesh would look like before a pour

There is technology to paint on explosives....very high tech and powerfull...

If painted on floor trusses as fireproofing or under the floor decking as fireproofing then it could account for this.

The World Trade Centers just happened to be under construction renovations to paint structural steel and to re-fireproof.

Perhaps it could explain some of this video...

[ame="http://http://www.youtube.com/watch?v=BnR4A4zb8B0"]http://http://www.youtube.com/watch?v=BnR4A4zb8B0[/ame]

[ame="http://http://www.youtube.com/watch?v=EgN080yySe0"]http://http://www.youtube.com/watch?v=EgN080yySe0[/ame]

Concert when it get's hot enough will explode. Fireproofing isn't painted on it's like a wool looking substance that is applied to metal structure in a wet forms It can be removed easily if hit.

Ever see a tire get burned and how much of the steel wire belts are left?

Can you imagine how much steel wire would be in the pile?

Or the steel decking for that matter...

 

[bigrebnc1775]

There is technology to paint on explosives....very high tech and powerfull...

If painted on floor trusses as fireproofing or under the floor decking as fireproofing then it could account for this.

The World Trade Centers just happened to be under construction renovations to paint structural steel and to re-fireproof.

Perhaps it could explain some of this video...

http://http://www.youtube.com/watch?v=BnR4A4zb8B0

http://http://www.youtube.com/watch?v=EgN080yySe0

Concert when it get's hot enough will explode. Fireproofing isn't painted on it's like a wool looking substance that is applied to metal structure in a wet forms It can be removed easily if hit.

Ever see a tire get burned and how much of the steel wire belts are left?

Can you imagine how much steel wire would be in the pile?

Or the steel decking for that matter...

Have you ever seen a slab of concert cut and busted?

 

[hortysir]

Ever see a tire get burned and how much of the steel wire belts are left?

Can you imagine how much steel wire would be in the pile?

Or the steel decking for that matter...

Ever see a fire hotter than a tire-fire....?????

I think the Elf-Fairies carried them away to Tinsel Village, myself.

 

[Crackerjack]

Ever see a tire get burned and how much of the steel wire belts are left?

Can you imagine how much steel wire would be in the pile?

Or the steel decking for that matter...

The Jews snuck back in after the implosion and removed all the wire. They already took the day off, remember?

Jews can be pretty slippery!

 

[whitehall]

Didn't you see the freaking planes hit the buildings? Is it alleged now by the tin foil hats that LBJ conspired with Richard Nixon to leave out the steel decking in the construction so that nut case jihadists could bring them down 30 years later? Do you think the Fire Dept conspired with the people who hauled the debris to Statin Is to hide the steel plates? What then?

 

[Rozman]

I bet there were a few pieces of furniture,maybe some chairs,desks,carpet,copying machines,pipes,all sorts of stuff was in the building that day...metal filing cabinets perhaps.Heavy floor tiles made of metal
that were common in computer rooms,heavy thick 2ft x 2ft metal square floor tiles that you needed a special suction cup device to pull the tile out...They weighed quite a bit.Where did they end up?

I really don't remember seeing any of those things intact lying around in the debris field.
What do you think happened to them?.....

 

[creativedreams]

Concert when it get's hot enough will explode. Fireproofing isn't painted on it's like a wool looking substance that is applied to metal structure in a wet forms It can be removed easily if hit.

Ever see a tire get burned and how much of the steel wire belts are left?

Can you imagine how much steel wire would be in the pile?

Or the steel decking for that matter...

Have you ever seen a slab of concert cut and busted?

No...

Fireproofing can be sprayed on too.

Now that I think of it I recall something to do with it that I felt was irelevent before...

When the new fireproofing was inspected it specifically said the fireproofing was applied in required thickness but FEMA could not find data on the type of fireproofing used..